Show simple item record

dc.contributor.authorM. Perl
dc.contributor.authorB. Ostraich
dc.date.accessioned2017-05-09T00:17:33Z
dc.date.available2017-05-09T00:17:33Z
dc.date.copyrightNovember, 2005
dc.date.issued2005
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28460#423_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/132471
dc.description.abstractThe distribution of the mode I stress intensity factor (SIF), resulting from autofrettage, along the fronts of radial, semi-elliptical surface cracks pertaining to large uniform arrays of unequal-depth cracks emanating at the bore of an overstrained thick-walled cylinder is studied. The three-dimensional analysis is based on the “two-crack depth level model” previously proposed and is performed via the finite element method employing singular elements along the crack front. The autofrettage residual stress field is simulated using an equivalent thermal load. The distribution of KIA, the stress intensity factor due to autofrettage, for numerous uneven array configurations bearing n=n1+n2=8–128 cracks, a wide range of crack depth-to-wall thickness ratios, a1∕t=0.01–0.4, and various crack ellipticities, a1∕c1=0.3–1.5, are evaluated for a cylinder of radii ratio Ro∕Ri=2. The results clearly indicate that unevenness, as reflected in KIA distribution, depends on all three parameters (i.e., the number of cracks in the array, cracks’ depth, and cracks’ ellipticity). The “interaction range” for the different combinations of crack arrays and crack depths is then evaluated. The range of influence between adjacent cracks on the maximal SIF, KAmax, is found to be dependent on the density of the array, as reflected in the intercrack aspect ratio, as well as on the cracks’ ellipticity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Autofrettage on Uniform Arrays of Three-Dimensional Unequal-Depth Cracks in a Thick-Walled Cylindrical Vessel
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2043210
dc.journal.fristpage423
dc.journal.lastpage429
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsAutofrettage
dc.keywordsCylinders AND Vessels
dc.treeJournal of Pressure Vessel Technology:;2005:;volume( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record