Show simple item record

dc.contributor.authorC. N. Munnings
dc.contributor.authorG. Amow
dc.contributor.authorP. S. Whitfield
dc.contributor.authorS. J. Skinner
dc.contributor.authorI. J. Davidson
dc.date.accessioned2017-05-09T00:16:47Z
dc.date.available2017-05-09T00:16:47Z
dc.date.copyrightFebruary, 2005
dc.date.issued2005
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-27240#34_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/132115
dc.description.abstractThe surface of La0.9Sr0.1Ga0.8Mg0.2O3−δ (LSGM 9182) has been examined through the use of secondary-ion mass spectrometry before and after surface modification by mechanical polishing. It was found that the cation stoichiometry varied at the surface in both cases. The effect of this change on the performance of the cathode material La2NiO4+δ was assessed through ac impedance spectroscopy of symmetrical cells prepared by depositing La2NiO4+δ on the surface of pellets of La0.9Sr0.1Ga0.8Mg0.2O3−δ. An improvement in the cathode performance of these cells at temperatures above 500°C was found on electrolytes with elevated levels of strontium and magnesium at the surface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStability and Reactivity of LSGM Electrolytes With Nickel-Based Ceramic Cathodes
dc.typeJournal Paper
dc.journal.volume2
dc.journal.issue1
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.1842780
dc.journal.fristpage34
dc.journal.lastpage37
dc.identifier.eissn2381-6910
dc.keywordsStability
dc.keywordsNickel
dc.keywordsElectrolytes
dc.keywordsMagnesium
dc.keywordsStoichiometry
dc.keywordsStrontium
dc.keywordsCeramics AND Temperature
dc.treeJournal of Fuel Cell Science and Technology:;2005:;volume( 002 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record