Show simple item record

dc.contributor.authorF. McBagonluri
dc.contributor.authorE. Akpan
dc.contributor.authorC. Mercer
dc.contributor.authorW. Shen
dc.contributor.authorW. O. Soboyejo
dc.date.accessioned2017-05-09T00:16:20Z
dc.date.available2017-05-09T00:16:20Z
dc.date.copyrightJanuary, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27065#46_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131909
dc.description.abstractSurface and subsurface crack nucleation and growth mechanisms are elucidated for equiaxed (microstructure 1), elongated (microstructure 2), and colony (microstructure 3) microstructures of Ti6242. Prominent cleavage facets, indicative of a Stroh-type dislocation-pile phenomenon characterize the nucleation sites. Beachmarking and scanning electron microscopy (SEM) techniques are used to study fatigue crack growth rates and crack shape evolution in the short and long crack regimes. The studies reveal that surface crack growth rate data are generally comparable to the through-crack growth rate data in the long crack growth regime. However, the depth crack growth rates are somewhat slower than the through-crack growth rates. Surface crack evolution profiles are shown to exhibit a tendency towards “Preferred Propagation Paths” (PPPs). However, the magnitudes of the aspect ratios along the PPPs are different from those reported for square or rectangular cross sections subjected to cyclic tension or bending loads. Finally, the measured crack lengths and aspect ratios are compared with predictions obtained from a fracture mechanics model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Investigation of the Effects of Microstructure on Fatigue Crack Growth in Ti-6242
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1836771
dc.journal.fristpage46
dc.journal.lastpage57
dc.identifier.eissn1528-8889
dc.keywordsNucleation (Physics)
dc.keywordsFracture (Materials)
dc.keywordsFatigue cracks
dc.keywordsFracture mechanics
dc.keywordsShapes
dc.keywordsStress
dc.keywordsFatigue AND Mechanisms
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record