Show simple item record

dc.contributor.authorV. K. Gupta
dc.contributor.authorS. B. Singh
dc.contributor.authorH. N. Chandrawat
dc.contributor.authorS. Ray
dc.date.accessioned2017-05-09T00:16:19Z
dc.date.available2017-05-09T00:16:19Z
dc.date.copyrightJanuary, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27065#97_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131894
dc.description.abstractThe creep behavior of a rotating disc made of isotropic composite containing varying amounts of silicon carbide in the radial direction has been investigated in the presence of a thermal gradient, also in the radial direction. The variation of silicon carbide content has been so tailored as to contain larger amounts of particles in a highly stressed region. This type of inhomogeneous material is known as Functionally Graded Material (FGM). The thermal gradient experienced by the disc is the result of braking action as estimated by FEM analysis. The creep behavior of the disc under stresses developing due to rotation has been determined following Sherby’s law and compared with that of a similar disc following Norton’s law. The difference in the distribution of stresses and strain rates in the discs does not follow any definite trend but the values are somewhat different. The presence of thermal gradient and a linear particle gradient separately or their simultaneous presence result in a significant decrease in steady state creep rates as compared to that in a composite disc with the same average particle content (20 vol %) distributed uniformly and operating under isothermal condition. Further, the study revealed that the creep behavior of a FGM disc could be significantly improved by increasing the gradient of particle distribution while keeping the same average particle content of 20 vol % silicon carbide in the disc.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling of Creep Behavior of a Rotating Disc in the Presence of Both Composition and Thermal Gradients
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1839187
dc.journal.fristpage97
dc.journal.lastpage105
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsComposite materials
dc.keywordsParticulate matter
dc.keywordsStress
dc.keywordsDisks
dc.keywordsFunctionally graded materials
dc.keywordsRotating Disks
dc.keywordsTemperature gradients AND Gradients
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record