| dc.contributor.author | Sia Nemat-Nasser | |
| dc.contributor.author | Minoru Taya | |
| dc.contributor.author | Jeom Yong Choi | |
| dc.contributor.author | Wei-Guo Guo | |
| dc.contributor.author | Jon B. Isaacs | |
| dc.date.accessioned | 2017-05-09T00:16:19Z | |
| dc.date.available | 2017-05-09T00:16:19Z | |
| dc.date.copyright | January, 2005 | |
| dc.date.issued | 2005 | |
| dc.identifier.issn | 0094-4289 | |
| dc.identifier.other | JEMTA8-27065#83_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/131892 | |
| dc.description.abstract | The compressive response of a NiTi shape-memory alloy is investigated at various strain rates using UCSD’s modified 12-in. Hopkinson pressure bar and a conventional Instron machine. To obtain a constant strain rate during the formation of a stress-induced martensite in a Hopkinson test, a copper tube of suitable dimensions is employed as a pulse shaper, since without a pulse shaper the strain rate of the sample varies significantly as its microstructure changes from austenite to martensite, whereas with proper pulse shaping techniques a nearly constant strain rate can be achieved over a certain deformation range. The NiTi shape-memory alloy shows a superelastic response for small strains at all considered strain rates and at room temperature, 296 K. At this temperature and below a certain strain rate, the stress–strain curves of the NiTi shape-memory alloy display two regimes: an elastic austenite regime and a transition (stress-induced martensite) regime. The transition stress of this material and the work-hardening rate in the stress-induced martensite regime increase with increasing strain rate, the latter reaching a steady state level and then rapidly increasing. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | High Strain-Rate, Small Strain Response of a NiTi Shape-Memory Alloy | |
| dc.type | Journal Paper | |
| dc.journal.volume | 127 | |
| dc.journal.issue | 1 | |
| dc.journal.title | Journal of Engineering Materials and Technology | |
| dc.identifier.doi | 10.1115/1.1839215 | |
| dc.journal.fristpage | 83 | |
| dc.journal.lastpage | 89 | |
| dc.identifier.eissn | 1528-8889 | |
| dc.keywords | Deformation | |
| dc.keywords | Temperature | |
| dc.keywords | Shape memory alloys | |
| dc.keywords | Stress | |
| dc.keywords | Nickel titanium alloys | |
| dc.keywords | Copper | |
| dc.keywords | Work hardening | |
| dc.keywords | Machinery | |
| dc.keywords | Pulse shaping | |
| dc.keywords | Pressure AND Stress-strain curves | |
| dc.tree | Journal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 001 | |
| dc.contenttype | Fulltext | |