Show simple item record

dc.contributor.authorWilliam Jordan
dc.date.accessioned2017-05-09T00:16:18Z
dc.date.available2017-05-09T00:16:18Z
dc.date.copyrightApril, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27070#257_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131889
dc.description.abstractThis research project used hot embossing to create a strong and tough polymeric based composite structure. A honeycomb type structure was created by pressing small grooves into thin polycarbonate sheets. A trapezoidal die was used to create hexagonal shaped channels in the polymeric sheet. A number of these sheets were then bonded together to form a composite material. Carbon fibers were embedded into the channels in some of the laminates. The embossing process was carried out at an elevated temperature in an environmental chamber attached to an MTS servo hydraulic testing machine. The grooved structure had a 31% to 45% decrease in the apparent density compared to the ungrooved specimens. Bend tests, tensile tests, and Charpy impact tests were performed on laminates made from this material. The specific values of tensile strength, flexural modulus, and Charpy impact toughness were increased. A small percentage of fibers significantly increased both the stiffness and strength of the laminate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUsing Embossing to Create a Fiber Reinforced Honeycomb Composite
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1867985
dc.journal.fristpage257
dc.journal.lastpage262
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers
dc.keywordsLaminates
dc.keywordsEmbossing
dc.keywordsTemperature
dc.keywordsChannels (Hydraulic engineering) AND Toughness
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record