Show simple item record

dc.contributor.authorToshihiko Nishimura
dc.contributor.authorResearch Manager
dc.date.accessioned2017-05-09T00:16:18Z
dc.date.available2017-05-09T00:16:18Z
dc.date.copyrightApril, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27070#244_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131887
dc.description.abstractCrack arresting capability is experimentally examined using center cracked tension specimens and varying the placement of the dimple ahead of the crack tip. It is confirmed that the dimple gives a greater crack arrest effect than that of the stop hole method. Next, the fatigue life of smooth specimens is compared, both with and without dimples. It is indicated that the dimple has a benefit only to the repair case after the crack is initiated. Finally, stress intensity factors of a crack due to a dimple are numerically evaluated, and a guiding principle is clarified for placing dimples.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental and Numerical Evaluation of Crack Arresting Capability Due to a Dimple
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1865185
dc.journal.fristpage244
dc.journal.lastpage250
dc.identifier.eissn1528-8889
dc.keywordsForce
dc.keywordsFracture (Materials) AND Stress
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record