Show simple item record

dc.contributor.authorL. Q. Zhou
dc.contributor.authorY. P. Li
dc.contributor.authorY. C. Zhou
dc.date.accessioned2017-05-09T00:16:18Z
dc.date.available2017-05-09T00:16:18Z
dc.date.copyrightApril, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27070#233_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131886
dc.description.abstractThe elastic-plastic finite element method of a dynamic explicit algorithm was used to simulate the deep drawing processes of nickel coating electrodeposited on a steel substrate to form an advanced battery shell. The Belytschko-Wong-Chiang shell element was used to mesh the materials, the kinematical work-hardening model was adopted for the components, and the tied-with-failure contact criterion was given to the interfacial combination. The rate-type elastic-plastic constitute law was employed to handle the large deformation, and the central difference method was utilized to solve the finite element equations. The simulations of the materials in the first and final processes illustrated that the steel substrate and the nickel coating were simultaneously deformed and yielded in the die fillet profile and the flange area. The thickness variation of the nickel coating and steel substrate was dependent on the main principal stress, and their variation rule was consistent. In the entire drawing processes, the thinnest region after forming was at the lower part of the cup near the cup bottom, the extent of the coating being thinned after drawing was acceptable, and the material was capable of forming the battery shell. The simulated results were partly compared with tests and other analysis and showed good agreement.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Analysis of Electrodeposited Nickel Coating in Multistage Drawing Processes
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1865184
dc.journal.fristpage233
dc.journal.lastpage243
dc.identifier.eissn1528-8889
dc.keywordsNickel
dc.keywordsCoating processes
dc.keywordsCoatings
dc.keywordsStress
dc.keywordsDeformation
dc.keywordsThickness
dc.keywordsSteel
dc.keywordsShells
dc.keywordsFlanges
dc.keywordsNumerical analysis
dc.keywordsEquations AND Batteries
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record