Show simple item record

dc.contributor.authorM. Chadli
dc.contributor.authorA. Abdul-Latif
dc.date.accessioned2017-05-09T00:16:18Z
dc.date.available2017-05-09T00:16:18Z
dc.date.copyrightApril, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27070#214_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131884
dc.description.abstractA micromechanical model of damaged elasto-inelastic behavior is proposed to predict the plastic fatigue life for fcc metallic polycrystals under multiaxial loading paths. This model is expressed in the time-dependent plasticity for a small strain assumption. In order to generalize and then to increase the model applicability (with respect to other works of the author) in describing the cyclic stress-strain evolution during plastic fatigue, it is therefore assumed that a damage variable initiates and then evolves at the grain level where the phenomenon of the localized plastic deformation occurs. The associated thermodynamic force of the damage variable is determined as a total granular energy (elastic and inelastic). The transition of the elastic strain from the single to the polycrystal, which is classically performed by averaging procedures in this type of modeling, is modified due to the coupling of such a strain with damage. The developed model is tested under different multiaxial cyclic loading situations (tension-compression and tension-torsion with different out-of-phase angles). The effects the loading paths and the grains aggregate type on the fatigue life are appropriately investigated. It is demonstrated that the model can correctly describe the overall and local damaged behavior of polycrystals.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMesodamage Evolution in Polycrystals
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1857939
dc.journal.fristpage214
dc.journal.lastpage221
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsFatigue
dc.keywordsStress
dc.keywordsHardening
dc.keywordsModeling
dc.keywordsFatigue life
dc.keywordsTension
dc.keywordsPlasticity
dc.keywordsTensors
dc.keywordsTorsion
dc.keywordsElasticity
dc.keywordsForce AND Compression
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record