Show simple item record

dc.contributor.authorS. Kunaporn
dc.contributor.authorM. Ramulu
dc.contributor.authorASME Fellow
dc.contributor.authorM. Hashish
dc.contributor.authorASME Fellow
dc.date.accessioned2017-05-09T00:16:18Z
dc.date.available2017-05-09T00:16:18Z
dc.date.copyrightApril, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27070#186_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131880
dc.description.abstractWaterjet peening is a recent promising method in surface treatment. It has the potential to induce compressive residual stresses that benefit the fatigue life of materials similar to the conventional shot peening process. However, there are no analytical models that incorporate process parameters (i.e., supply pressure, jet exposure time, and nozzle traverse rate, etc) to allow predicting the optimized peening process. Mathematical modeling of high-pressure waterjet peening was developed in this study to describe the relation between the waterjet peening parameters and the resulting material modifications. Results showed the possibility of using the proposed mathematical model to predict an initial range for effective waterjet peening under the variation of waterjet peening conditions. The high cycle fatigue tests were performed to validate the proposed model and fatigue test results showed good agreement with the predictions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMathematical Modeling of Ultra-High-Pressure Waterjet Peening
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1857934
dc.journal.fristpage186
dc.journal.lastpage191
dc.identifier.eissn1528-8889
dc.keywordsPressure
dc.keywordsShot peening
dc.keywordsModeling AND Nozzles
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record