• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Engineering Materials and Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Formability and Weld Zone Analysis of Tailor-Welded Blanks for Various Thickness Ratios

    Thumbnail
    View/Open
    JEMTA8-27070#179_1.pdf (1.110Mb)
    Date
    2005
    Author
    L. C. Chan
    S. M. Chan
    C. H. Cheng
    T. C. Lee
    Metadata
    Show full item record
    Abstract
    Cold-rolled steel sheets of thicknesses ranging from 0.5 to 1.0 mm were used to produce tailor-welded blanks (TWBs) with various thickness ratios. In this study, the formability of the TWBs, as well as the mechanical characteristics of the weld zones, were analyzed experimentally under the effects of various thickness ratios of TWBs. The formability of the TWBs was evaluated in terms of three measures—failure mode, forming limit diagram, and minimum major strain, whereas the mechanical characteristics of the weld zones were investigated by tensile testing, metallographic study, and microhardness measurement. In particular, circular TWBs with different radii and cutoff widths were designed where all the welds were located in the center of the blanks and perpendicular to the principal strain direction. Nd:YAG laser butt-welding was used to weld the TWB specimens of different thickness ratios. The experimental findings in this study showed that the higher the thickness ratio of the TWBs, the lower the forming limit curve level, and the lower formability. The minimum major strain was clearly inversely proportional to the thickness ratio of the TWBs. On the other hand, the results of uniaxial tensile tests clearly illustrated that there was no significant difference between the tensile strengths of the TWBs and those of the base metals. The metallographic study demonstrated a difference of grain size in the materials at base metal, heat-affected zones, and fusion zone. The microhardness measurement indicated that the hardness in the fusion zone increased by about 60% of the base metal.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/131878
    Collections
    • Journal of Engineering Materials and Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV