Show simple item record

dc.contributor.authorMohamed N. Nasr
dc.contributor.authorM. N. Abouelwafa
dc.contributor.authorA. Gomaa
dc.contributor.authorA. Hamdy
dc.contributor.authorE. Morsi
dc.date.accessioned2017-05-09T00:16:17Z
dc.date.available2017-05-09T00:16:17Z
dc.date.copyrightJuly, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27072#301_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131870
dc.description.abstractThe effect of torsional mean stress on the fatigue behavior of glass fiber-reinforced polyester (GFRP) is studied by testing thin-walled, woven-roving tubular specimens with two fiber orientations, [±45°]2s and [0,90°]2s, at negative stress ratios (R),R=−1,−0.75,−0.5,−0.25, 0. The [±45°]2s specimens were found to have higher fatigue strength than the [0,90°]2s specimens at all stress ratios. This is attributed to the difference in local stress components, the [±45°]2s specimens being subjected to tension-compression local stress components, while the [0,90°]2s specimens being subjected to pure local shear stress. For the studied stress ratios; the mean stress component had a detrimental effect on the amplitude component for the [±45°]2s specimens; while it was ineffective for the [0,90°]2s specimens in a certain region in the mean-amplitude diagram, region (1), then it had a detrimental effect in the rest of the diagram, region (2). The S–N curves for positive stress ratios were extrapolated from those for negative stress ratios, which were found experimentally, for the [0,90°]2s specimens. The positive stress ratio points, having the same local stress state as the negative ones, showed an acceptable behavior tending to decrease the amplitude component for the same life.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Mean Stress on the Fatigue Behavior of Woven-Roving Glass Fiber-Reinforced Polyester Subjected to Torsional Moments
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1925285
dc.journal.fristpage301
dc.journal.lastpage309
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsFibers
dc.keywordsStress
dc.keywordsGlass AND Polyester fabrics
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record