Show simple item record

dc.contributor.authorYong Gan
dc.contributor.authorDongyun Lee
dc.contributor.authorXi Chen
dc.contributor.authorJeffrey W. Kysar
dc.date.accessioned2017-05-09T00:16:16Z
dc.date.available2017-05-09T00:16:16Z
dc.date.copyrightOctober, 2005
dc.date.issued2005
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27074#451_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131861
dc.description.abstractNanocomposite thin films which consist of 50nmAl2O3 nanoparticles in a copper metal matrix were deposited on a silicon wafer. The thickness of the nanocomposite thin films was about 3microns and the volume density of the nanoparticles was between 3% and 5%. The films were synthesized using electrocodeposition. The grain size of the nanocomposite film was significantly smaller than the grain size of control films of pure copper. Electron backscatter diffraction (EBSD) experiments indicate that neither the nanocomposite thin films nor the control films exhibits a crystallographic texture. Nanoindentation experiments show that the hardness of the nanocomposite thin film is approximately 25% higher than the hardness of the control films of pure copper. A prototype of a microchannel array in the nanocomposite thin film was made using standard microelectromechanical (MEMS) fabrication technology. It is expected that the enhanced mechanical properties exhibited by nanocomposite thin films have the potential to improve the reliability of various MEMS devices which rely on thin metal films. The results presented herein lay the groundwork for future studies in which the size, volume density, morphology, distribution as well as type of nanoparticle in the nanocomposite will be systematically and independently varied in order to optimize mechanical properties.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStructure and Properties of Electrocodeposited Cu–Al2O3 Nanocomposite Thin Films
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1925292
dc.journal.fristpage451
dc.journal.lastpage456
dc.identifier.eissn1528-8889
dc.keywordsThin films
dc.keywordsNanocomposites
dc.keywordsNanoparticles
dc.keywordsMechanical properties AND Copper
dc.treeJournal of Engineering Materials and Technology:;2005:;volume( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record