• Login
    View Item 
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    •   DSpace Home
    • ASME
    • Journal of Energy Resources Technology
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Formation Sand Liquefaction: A Mechanism for Explaining Fines Migration and Well Sanding

    Thumbnail
    View/Open
    JERTD2-26528#181_1.pdf (268.1Kb)
    Date
    2005
    Author
    A. Hayatdavoudi
    Metadata
    Show full item record
    Abstract
    To understand the basic relationship between the rising water-cut, well sanding, and migration of fines, the author’s work led him to examine the mechanism of well sanding due to sand liquefaction in cases where the storm chokes in offshore wells were activated and when the production platform separator lines froze due to sudden cold weather. The author found that as the original water-oil contact plane rose above the original plane of contact, it caused a drastic change in water saturation and relative permeability. We show the increased water saturation decreases the resistance of the formation to stress by as much as 50%. This is one of the causes of sand liquefaction at or near the perforation cavities. The parameters affecting the process most are the fine-particle buoyancy, changes in the effective stress and the bulk density of the sand, the pore pressure buildup and changes in porosity near the perforation cavities, the induced transient shear stress resulting from the water-hammer total pressure wave, and the lack of adequate cohesive cement or interlocking contacts between the grains of the unconsolidated sand. The simple model calculations pointed to the conclusion that if the grains of the unconsolidated sand or the fine particles accelerated above the threshold limit of 0.19000g, the chances for fines migration and sand liquefaction were high. Furthermore, if, at the free face of the washed-out perf tunnels or the cavernous cavities of the unconsolidated sand, the total pressure wave magnitude exceeded the shear resistance of the sand, then sand liquefaction was certain to occur. The obvious outcome of this process is nothing but serious formation damage. Based on his models, the author’s recommendation for alleviating this type of damage, includes but is not limited to selective perforation, oriented perforation, gravel packing, frac packing, filter packing, trajectory planning for well reentries, and controlled drawdown.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/131689
    Collections
    • Journal of Energy Resources Technology

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV