Show simple item record

dc.contributor.authorJ. M. Schembre
dc.contributor.authorA. R. Kovscek
dc.date.accessioned2017-05-09T00:15:56Z
dc.date.available2017-05-09T00:15:56Z
dc.date.copyrightSeptember, 2005
dc.date.issued2005
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26528#171_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131688
dc.description.abstractThe pore and grain surface of reservoir rocks often has clay and other fine material attached onto pore walls. It has been long recognized that brine salinity and pH are key factors affecting the attractive forces between pore surfaces and fines. If mobilized particles are assembled in sufficient quantities, they obstruct pore throats and reduce the permeability of the formation. There is anecdotal evidence of substantial fines migration during steam injection enhanced oil recovery operations. As of yet, the mechanism of fines release with temperature is unexplained. The Derjaguin, Landau, Verwey, and Overbeek theory of colloidal stability is used in conjunction with laboratory, core-scale experiments to demonstrate that high temperature, alkaline pH, and low salinity (typical characteristics of steam condensate) are sufficient to induce fines mobilization. Temperature is a key variable in calculations of fines stability. Hot-water floods are performed in Berea sandstone at temperatures ranging from 20°C to 200°C. Permeability reduction is observed with temperature increase and fines mobilization occurs repeatably at a particular temperature that varies with solution pH and ionic strength. A scanning electron microscope is used to analyze composition of the effluent samples collected during experiments. It confirms the production of fine clay material. On the practical side, this study provides design criteria for steam injection operations so as to control fines production.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanism of Formation Damage at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1924398
dc.journal.fristpage171
dc.journal.lastpage180
dc.identifier.eissn1528-8994
dc.keywordsTemperature
dc.keywordsKaolinite
dc.keywordsForce
dc.keywordsMechanisms AND Permeability
dc.treeJournal of Energy Resources Technology:;2005:;volume( 127 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record