Show simple item record

dc.contributor.authorA. C. Seibi
dc.contributor.authorS. Al-Hiddabi
dc.contributor.authorT. Pervez
dc.date.accessioned2017-05-09T00:15:55Z
dc.date.available2017-05-09T00:15:55Z
dc.date.copyrightDecember, 2005
dc.date.issued2005
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26531#323_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131685
dc.description.abstractThe theory of metal forming has been used to study the mechanical response of a solid tubular under radial plastic expansion. A mathematical model of an expanded thin walled tube under compression has been developed in this paper. The study showed that as the friction coefficient and mandrel angle increase the drawing force and induced stresses increase. However, the final tube thickness and length were found to decrease with an increase in both parameters.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStructural Behavior of a Solid Tubular Under Large Radial Plastic Expansion
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1926309
dc.journal.fristpage323
dc.journal.lastpage327
dc.identifier.eissn1528-8994
dc.keywordsForce
dc.keywordsFriction
dc.keywordsStress
dc.keywordsThickness
dc.keywordsCompression AND Equations
dc.treeJournal of Energy Resources Technology:;2005:;volume( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record