Show simple item record

dc.contributor.authorQian Wang
dc.contributor.authorTom X. Chen
dc.contributor.authorCem Sarica
dc.date.accessioned2017-05-09T00:15:55Z
dc.date.available2017-05-09T00:15:55Z
dc.date.copyrightDecember, 2005
dc.date.issued2005
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26531#302_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131682
dc.description.abstractPigging has been recognized as the most cost-effective method for preventing flow restriction by wax deposits in subsea flowlines. However, the pigging mechanics for wax removal in pipelines is still very poorly understood. A unique test facility was designed and constructed for experimental studies on the mechanics of wax removal in pipelines. The test facility consisted of a test section, a support structure, an apparatus to pull the pig through the test pipe, and a computer-based data acquisition system. The test section was 6.4m(21ft) long and was made from 0.0762m(3in.) inner diameter schedule-40 steel pipe. The mixture of commercial wax and mineral oil was cast inside the test section at different wax thickness and oil contents. A series of experiments was performed to investigate the wax removal mechanics with three different types of conventional pigs, i.e., cup, disc, and foam pigs. The experiments showed that a typical wax removal process using a pig followed four distinct phases, namely, wax breaking, plug formation, accumulation, and production phases. Wax accumulation can be very significant and is expected to be the dominating factor for the force required for moving a pig in long pipelines. As wax thickness and hardness increases, the required force to move the pig increases. The shape and material of the pig have a profound effect on the wax removal performance. While the disc pig provides the most efficient wax removal, the force requirement is excessive, especially for thicker and harder wax deposits. The wax removal performance of a cup pig is very similar to that of a disc pig. However, the cup pig can withstand higher load without mechanical damages than the disc pig. The foam pig offers the poorest wax removal performance.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Experimental Study on Mechanics of Wax Removal in Pipeline
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2047591
dc.journal.fristpage302
dc.journal.lastpage309
dc.identifier.eissn1528-8994
dc.keywordsPipelines
dc.keywordsPipes
dc.keywordsDisks
dc.keywordsForce
dc.keywordsThickness
dc.keywordsShapes
dc.keywordsTest facilities AND Stress
dc.treeJournal of Energy Resources Technology:;2005:;volume( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record