Show simple item record

dc.contributor.authorWen-Hong Zhu
dc.contributor.authorJean-Claude Piedboeuf
dc.date.accessioned2017-05-09T00:15:45Z
dc.date.available2017-05-09T00:15:45Z
dc.date.copyrightJune, 2005
dc.date.issued2005
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26342#206_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131559
dc.description.abstractAn adaptive output force control scheme for hydraulic cylinders is proposed by using direct output force measurement through loadcells. Due to the large and somewhat uncertain piston friction force, cylinder chamber pressure control with Coulomb-viscous friction prediction may not be sufficient enough to achieve a precise output force control. In the proposed approach, the output force error resulting from direct measurement is used not only for feedback control, but also to update the parameters of an appropriate friction model which includes the Coulomb-viscous friction force in sliding motion and the output force dependent friction force in presliding motion. The L2 and L∞ stability is guaranteed for both the pressure force error and the output force error. Under bounded desired output force and its derivative, asymptotic stability of both the pressure force error and the output force error is also guaranteed. The experimental results demonstrate that a good pressure force control system does not necessarily guarantee a good output force control, and that adaptive friction compensation is superior to fixed-parameter friction compensation. The output force control transfer functions of a robot joint driven by two hydraulic cylinders in pull–pull configuration are limited by ±1.5dB up to 20Hz, tested in free motion and in rigid constraint. The excellent output force (joint torque) control performance implies the dynamic equivalency between a hydraulic cylinder and an electrically-driven motor within the prespecified bandwidth. This allows to emulate an electrically-driven robot by a hydraulic robot.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAdaptive Output Force Tracking Control of Hydraulic Cylinders With Applications to Robot Manipulators
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1898237
dc.journal.fristpage206
dc.journal.lastpage217
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsPressure
dc.keywordsFriction
dc.keywordsCylinders
dc.keywordsMotion
dc.keywordsForce control
dc.keywordsPistons AND Hydraulic cylinders
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2005:;volume( 127 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record