Show simple item record

dc.contributor.authorRoger Fales
dc.contributor.authorErik Spencer
dc.contributor.authorKurt Chipperfield
dc.contributor.authorFrank Wagner
dc.contributor.authorAtul Kelkar
dc.date.accessioned2017-05-09T00:15:43Z
dc.date.available2017-05-09T00:15:43Z
dc.date.copyrightSeptember, 2005
dc.date.issued2005
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26344#415_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131541
dc.description.abstractThis paper presents dynamic modeling, controller design, and virtual reality (VR)-based human-in-the-loop real-time simulation for a wheel loader control system. In particular, a loader with electrohydraulic actuation is considered. A detailed nonlinear dynamic model is developed for the hydraulic system and the loader linkage. The hydraulic model includes a load sensing pump, valves, and cylinders. The linkage model represents a two degree of freedom loader with lift and tilt functions. A linear quadratic Gaussian based robust controller is designed for automatic bucket leveling to assist the operator by keeping the angle of the bucket leveled while the boom is in motion. The closed-loop control system design is tested with a nonlinear model in a real-time VR simulation. In the VR simulation, the operator interacts with the model using a joystick input. The loader linkage geometry is displayed to the operator in real time using a VR display. The controller performance was assessed in the VR environment. As expected, the controller was found to provide a significant improvement in the accuracy of the bucket leveling, particularly in the case of a novice operator controlling the linkage motion. While prototypes cannot be eliminated, the VR simulation combined with realistic physics and control dynamics provided a useful tool for evaluating hydraulic systems and controls with less reliance on prototype machines.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling and Control of a Wheel Loader With a Human-in-the-Loop Assessment Using Virtual Reality
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1985437
dc.journal.fristpage415
dc.journal.lastpage423
dc.identifier.eissn1528-9028
dc.keywordsDynamics (Mechanics)
dc.keywordsMachinery
dc.keywordsControl systems
dc.keywordsControl equipment
dc.keywordsHydraulics
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsLinkages
dc.keywordsDesign
dc.keywordsPumps
dc.keywordsValves
dc.keywordsCylinders
dc.keywordsVirtual reality
dc.keywordsWheels
dc.keywordsEngineering simulation
dc.keywordsHydraulic systems
dc.keywordsEngineering prototypes
dc.keywordsControl modeling
dc.keywordsEquations
dc.keywordsErrors
dc.keywordsMotion AND Geometry
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2005:;volume( 127 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record