Show simple item record

dc.contributor.authorGregory M. Shaver
dc.contributor.authorPatrick A. Caton
dc.contributor.authorChristopher F. Edwards
dc.contributor.authorJ. Christian Gerdes
dc.contributor.authorMatthew J. Roelle
dc.date.accessioned2017-05-09T00:15:43Z
dc.date.available2017-05-09T00:15:43Z
dc.date.copyrightSeptember, 2005
dc.date.issued2005
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26344#374_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131538
dc.description.abstractOne practical method for achieving homogeneous charge compression ignition (HCCI) in internal combustion engines is to modulate the valves to trap or reinduct exhaust gases, increasing the energy of the charge, and enabling autoignition. Controlling combustion phasing with valve modulation can be challenging, however, since any controller must operate through the chemical kinetics of HCCI and account for the cycle-to-cycle dynamics arising from the retained exhaust gas. This paper presents a simple model of the overall HCCI process that captures these fundamental aspects. The model uses an integrated Arrhenius rate expression to capture the importance of species concentrations and temperature on the ignition process and predict the start of combustion. The cycle-to-cycle dynamics, in turn, develop through mass exchange between a control volume representing the cylinder and a control mass modeling the exhaust manifold. Despite its simplicity, the model predicts combustion phasing, pressure evolution and work output for propane combustion experiments at levels of fidelity comparable to more complex representations. Transient responses to valve timing changes are also captured and, with minor modification, the model can, in principle, be extended to handle a variety of fuels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1979511
dc.journal.fristpage374
dc.journal.lastpage381
dc.identifier.eissn1528-9028
dc.keywordsModeling
dc.keywordsValves
dc.keywordsCycles
dc.keywordsCylinders
dc.keywordsEquations
dc.keywordsExhaust systems
dc.keywordsManifolds
dc.keywordsHomogeneous charge compression ignition engines
dc.keywordsTemperature
dc.keywordsCombustion
dc.keywordsPressure
dc.keywordsFuels
dc.keywordsFlow (Dynamics) AND Simulation
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2005:;volume( 127 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record