Show simple item record

dc.contributor.authorTingshu Hu
dc.contributor.authorZongli Lin
dc.contributor.authorWei Jiang
dc.contributor.authorPaul E. Allaire
dc.date.accessioned2017-05-09T00:15:39Z
dc.date.available2017-05-09T00:15:39Z
dc.date.copyrightDecember, 2005
dc.date.issued2005
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26348#601_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/131514
dc.description.abstractWe study control problems in magnetic bearing systems that are subject to both input and state constraints. Apart from the usual restrictions on voltages and currents in the circuit systems, most magnetic bearing systems are subject to a severe state constraint: the motion of the rotor (the suspended object) is only allowed in an extremely small airgap, otherwise the collision of the rotor and the stator would cause severe damages. Traditional methods for avoiding a collision include increasing the airgap and increasing the currents, which would usually result in unnecessarily large capacity of power supply and power loss. In this paper we present a systematic approach for dealing with all the input and state constraints by using some recently developed tools for constrained control design. Issues on the stability region, robustness, disturbance rejections, and transient response are addressed. We hope that by dealing with the constraints properly, safety operation can be ensured with relatively small currents and power consumption. Experiments on the balance beam test rig in our laboratory show that the design techniques are effective.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConstrained Control Design for Magnetic Bearing Systems
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2101850
dc.journal.fristpage601
dc.journal.lastpage616
dc.identifier.eissn1528-9028
dc.keywordsStability
dc.keywordsDesign
dc.keywordsMagnetic bearings
dc.keywordsFeedback
dc.keywordsCurrent
dc.keywordsControl equipment
dc.keywordsEquipment and tools AND Electric potential
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2005:;volume( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record