Show simple item record

dc.contributor.authorTetsuya Watanabe
dc.contributor.authorKohei Suzuki
dc.contributor.authorFumiya Iiyama
dc.contributor.authorHiroshi Sodeyama
dc.date.accessioned2017-05-09T00:14:14Z
dc.date.available2017-05-09T00:14:14Z
dc.date.copyrightFebruary, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28433#110_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130728
dc.description.abstractThis report deals with the fundamental behavior of friction dampers for piping systems installed in industrial facilities. Energy dissipating effect depends on sliding displacement and friction force. If the sliding motion increases, the effect of energy dissipation is expected to rise. In this report, a ball screw-type magnetic friction damper is proposed to adapt on piping systems. In order to increase the frictional sliding, this damper converts an axial motion to a rotating motion by a ball screw. Frictional behavior occurs between a rotation disk and a fixed disk on the frame of damper. Friction force depends on the permanent magnets located on the fixed disk. The fundamental characteristics such as load-displacement curves, damping force at the ball bearing and inertia force of the rotation disk are obtained by experiments and a calculation model is made from the experimental data. The calculated responses are, then, compared with the results from the experiment. The calculation model is applied to a one-degree-of-freedom-system in order to investigate the response reduction effect of the system. An electromagnet is applied on the damper instead of the permanent magnet to control friction force and the controlled behavior is evaluated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleExperimental Study on Ball Screw Type Magnetic Friction Damper: Semiactive Control Using Electromagnet
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1634585
dc.journal.fristpage110
dc.journal.lastpage114
dc.identifier.eissn1528-8978
dc.keywordsFriction
dc.keywordsScrews
dc.keywordsDampers
dc.keywordsForce
dc.keywordsDisplacement
dc.keywordsElectromagnets
dc.keywordsRotation
dc.keywordsDamping AND Inertia (Mechanics)
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record