Show simple item record

dc.contributor.authorMitsumasa Midorikawa
dc.contributor.authorMasanori Iiba
dc.contributor.authorNorihide Koshika
dc.date.accessioned2017-05-09T00:14:13Z
dc.date.available2017-05-09T00:14:13Z
dc.date.copyrightFebruary, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28433#18_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130714
dc.description.abstractThe Building Code of Japan (the Building Standard Law of Japan) has been changed from the former prescriptive type into a performance-based type in June, 2000. This paper presents the evaluation procedures for seismic performance of seismically isolated buildings against major earthquake motions newly introduced to the Building Code of Japan in October, 2000. The evaluation procedures apply the equivalent single-degree-of-freedom (ESDOF) system, equivalent linearization and response spectrum analysis. The basic concept of seismic design spectra for major earthquake motions is (1) basic design spectra defined at the engineering bedrock, and (2) evaluation of site response from geotechnical data of surface soil layers. The principle of evaluation procedures is that the predicted response values should not exceed estimated limit values. The evaluation criteria of each portion of a building are (1) the isolation system shall be designed so that the maximum response displacement does not exceed the design limit displacement, and (2) the structure above the isolation system and the foundation and structural elements below the isolation system shall be designed so that the working stress does not exceed the allowable stress. The scope of application of the evaluation procedures is (1) buildings not exceeding 60 meters in height, and (2) base isolation buildings on the soil layers excluding very soft soils.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSeismic Performance Evaluation of Seismically Isolated Buildings Introduced to the Building Code of Japan
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1638390
dc.journal.fristpage18
dc.journal.lastpage24
dc.identifier.eissn1528-8978
dc.keywordsSpectra (Spectroscopy)
dc.keywordsStructures
dc.keywordsMotion
dc.keywordsShear (Mechanics)
dc.keywordsDampers
dc.keywordsDamping
dc.keywordsDesign
dc.keywordsDisplacement
dc.keywordsEarthquakes
dc.keywordsSoil
dc.keywordsStiffness
dc.keywordsBuilding codes
dc.keywordsStress
dc.keywordsPerformance evaluation AND Emission spectroscopy
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record