Show simple item record

dc.contributor.authorDo-Jun Shim
dc.contributor.authorJae-Boong Choi
dc.contributor.authorYoung-Jin Kim
dc.date.accessioned2017-05-09T00:14:11Z
dc.date.available2017-05-09T00:14:11Z
dc.date.copyrightMay, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28438#179_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130695
dc.description.abstractFailure assessment of a pipe with local wall thinning draws increasing attention in the nuclear power plant industry. Although many guidelines have been developed and are used for assessing the integrity of a wall-thinned pipeline, most of these guidelines consider only pressure loading and thus neglect bending loading. As most pipelines in nuclear power plants are subjected to internal pressure and bending moment, an assessment procedure for locally wall-thinned pipeline subjected to combined loading is urgently needed. In this paper, three-dimensional finite element (FE) analyses are carried out to simulate full-scale pipe tests conducted for various shapes of wall-thinned area under internal pressure and bending moment. Maximum moments based on ultimate tensile stress were obtained from FE results to predict the failure of the pipe. These results are compared with test results, showing good agreement. Additional finite element analyses are then performed to investigate the effect of key parameters, such as wall-thinned depth, wall-thinned angle and wall-thinned length, on maximum moment. Moreover, the effect of internal pressure on maximum moment was investigated. Change of internal pressure did not show significant effect on the maximum moment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure Strength Assessment of Pipes With Local Wall Thinning Under Combined Loading Based on Finite Element Analyses
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1687382
dc.journal.fristpage179
dc.journal.lastpage183
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsFinite element analysis
dc.keywordsPipes
dc.keywordsFailure AND Tension
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record