Show simple item record

dc.contributor.authorStanley Yokell
dc.date.accessioned2017-05-09T00:14:10Z
dc.date.available2017-05-09T00:14:10Z
dc.date.copyrightAugust, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28442#376_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130687
dc.description.abstractThis paper advocates correlating rolling torque or hydraulic expanding pressure with shear load strength instead of percent wall reduction as the criterion of expanding adequacy for thin-walled tubes. It compares magnitudes of measurements required to estimate wall reduction with cumulative hole-drilling and tube-manufacturing tolerances and graphically illustrates data scatter increase with ratio of tube diameter to wall thickness. As background it discusses expanding theory. It covers hydraulic, roller and hybrid expanding. It describes appropriate annular groove widths for hydraulic and hybrid expanding and concludes with comments on tube rolling procedure specifications and recommendations for two-stage and hybrid expanding.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAppropriate Correlations for Assessing Expanded Tube-to-Tubesheet Joint Strength
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1767176
dc.journal.fristpage376
dc.journal.lastpage381
dc.identifier.eissn1528-8978
dc.keywordsTorque
dc.keywordsPressure
dc.keywordsStress
dc.keywordsWall thickness
dc.keywordsCondensers (steam plant)
dc.keywordsMeasurement
dc.keywordsManufacturing
dc.keywordsShear (Mechanics)
dc.keywordsThickness
dc.keywordsMetals
dc.keywordsElectromagnetic scattering
dc.keywordsDrilling
dc.keywordsRollers
dc.keywordsYield stress
dc.keywordsShells AND Extruding
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record