Show simple item record

dc.contributor.authorJ. Yang
dc.contributor.authorJ. S. Hsiao
dc.contributor.authorM. Fong
dc.contributor.authorT. B. Gibbons
dc.date.accessioned2017-05-09T00:14:10Z
dc.date.available2017-05-09T00:14:10Z
dc.date.copyrightAugust, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28442#369_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130686
dc.description.abstractSince the early empirically based work of Kachanov and Robotnov substantial progress has been made in developing the concept of Continuum Damage Mechanics (CDM) as a tool for predicting material and component behavior in the creep regime. The key element in this process has been the progress that has been made in understanding and quantifying the physics of deformation and fracture in engineering alloys for high temperature service. In this paper, the application of the CDM methodology has been demonstrated in the prediction of the creep behavior of alloy steels for boiler pressure parts and for predicting the life to failure of model components and tubular testpieces operating in creep conditions. A model incorporating two damage state variables formed the basis of the methodology for creep behavior and a multi-axial variant of the model was used for the component life prediction. The important development described in this work has been the use of a simplifying procedure in dealing with damaged elements in the finite-element model, so that the analysis for component life prediction can be carried out on a personal computer rather than the large mainframe computers used previously. This greatly increases the usefulness of the procedure for practical design applications. The results show that the CDM methodology can be applied successfully in these important applications and will give much more satisfactory agreement with experiment than existing less robust methods. In addition the failure profile of the tubular testpieces can be accurately represented and this is a feature unique to the CDM approach.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Application of Physically Based CDM Modeling in Prediction of Materials Properties and Component Lifetime
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1767178
dc.journal.fristpage369
dc.journal.lastpage375
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsStress
dc.keywordsRupture
dc.keywordsFailure
dc.keywordsDesign
dc.keywordsDeformation
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsEquations
dc.keywordsAlloys
dc.keywordsModeling AND Pressure
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record