Show simple item record

dc.contributor.authorTarek M. El-Bagory
dc.contributor.authorMohamed S. El-Fadaly
dc.contributor.authorMaher Y. A. Younan
dc.contributor.authorLotfi A. Abdel-Latif
dc.date.accessioned2017-05-09T00:14:07Z
dc.date.available2017-05-09T00:14:07Z
dc.date.copyrightNovember, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28446#489_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130664
dc.description.abstractIn many modern engineering applications, designers and manufacturers of Polyvinyl chloride (PVC) pipes are interested in the evaluation of fracture toughness under several operation conditions. The aim of the present work is to investigate the fracture toughness of commercial amorphous thermoplastic PVC materials used in piping applications. The experimental work is carried out using three different specimens’ types: Taper Double Cantilever Beam (TDCB), Three Point Bend (TPB), and Compact Tension (CT). Tests are conducted on specimens with thickness (17, 20, 22, and 26 mm), longitudinal and transverse extrusion orientations, at different crosshead speeds (50–500 mm/min) to calculate the fracture toughness of PVC pipe materials. The experimental work has revealed that the crosshead speed has a significant effect on the fracture toughness at low speed rates. This effect, however, becomes insignificant at high rates since, the fracture behavior becomes brittle. The stress intensity factor KQ is approximately the same in both longitudinal and transverse orientations. The fracture toughness decreases as the specimen thickness increases.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of Crack Orientation and Crosshead Speed on the Fracture Toughness of PVC Pipe Materials
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1811110
dc.journal.fristpage489
dc.journal.lastpage496
dc.identifier.eissn1528-8978
dc.keywordsPolyvinyl chloride pipes
dc.keywordsFracture (Materials)
dc.keywordsFracture toughness
dc.keywordsTension
dc.keywordsThickness
dc.keywordsCantilever beams
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsPipes
dc.keywordsBrittle fracture AND Brittleness
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record