Show simple item record

dc.contributor.authorJohn H. Underwood
dc.contributor.authorAnthony P. Parker
dc.date.accessioned2017-05-09T00:14:07Z
dc.date.available2017-05-09T00:14:07Z
dc.date.copyrightNovember, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28446#485_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130663
dc.description.abstractStress and fracture analysis of ceramic-lined cannon pressure vessels is described, for a Si3N4 or SiC liner and A723 steel or carbon-epoxy jacket and with an initial residual interface pressure between liner and jacket and pressure applied to the bore. Room temperature stresses for a steel jacket over ceramic are similar to those for a carbon-epoxy jacket, but both radial and hoop jacket stresses can exceed typical carbon-epoxy strength values. Elevated temperature liner stresses are reduced for a carbon-epoxy jacket, due to the effective increase in interface pressure caused by differential thermal expansion. Critical crack sizes for brittle fracture are generally very small, albeit larger for Si3N4 than SiC due to lower liner stresses and higher fracture toughness for Si3N4.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress and Fracture Analysis of Ceramic Lined, Composite or Steel Jacketed Pressure Vessels
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1811109
dc.journal.fristpage485
dc.journal.lastpage488
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsCeramics
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsEpoxy adhesives
dc.keywordsFracture (Process)
dc.keywordsArtillery
dc.keywordsTemperature
dc.keywordsComposite materials
dc.keywordsPressure
dc.keywordsCarbon AND Vessels
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record