Show simple item record

dc.contributor.authorE. Troiano
dc.contributor.authorA. P. Parker
dc.contributor.authorJ. H. Underwood
dc.date.accessioned2017-05-09T00:14:07Z
dc.date.available2017-05-09T00:14:07Z
dc.date.copyrightNovember, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28446#473_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130661
dc.description.abstractHB7, an ultra-clean, high strength pressure vessel steel manufactured in France, is compared to A723 steel. This steel, suggested as an improved pressure vessel material is currently being proposed for critical applications, and will likely be used more frequently as design engineers discover its capabilities. This paper includes comparisons of strength, fracture toughness, fatigue properties and composition of the two steels, followed by an in-depth comparison and modeling of environmental cracking resistance, Bauschinger-modified residual stresses and fatigue lives. Results indicate that in all critical areas, with the exception of Bauschinger-reduced residual stress, the HB7 is superior to the A723 steel. Particularly for small amounts of autofrettage, near-bore residual stresses are reduced for HB7 steel compared to those for A723 steel at the same strength level. The greatest improvement of the HB7 over the A723 is in environmental cracking resistance. The HB7, when tested in concentrated sulfuric acid, exhibits five orders of magnitude longer crack incubation times and three orders of magnitude slower crack growth rates, when compared to A723 steel at the same strength level.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanisms and Modeling Comparing HB7 and A723 High Strength Pressure Vessel Steels
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1811108
dc.journal.fristpage473
dc.journal.lastpage477
dc.identifier.eissn1528-8978
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsModeling
dc.keywordsFracture (Materials)
dc.keywordsStress
dc.keywordsAutofrettage
dc.keywordsFracture (Process) AND Mechanisms
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record