Show simple item record

dc.contributor.authorNoel P. O’Dowd
dc.contributor.authorHyeong Y. Lee
dc.contributor.authorRobert C. Wimpory
dc.contributor.authorFarid R. Biglari
dc.contributor.authorKamran M. Nikbin
dc.date.accessioned2017-05-09T00:14:06Z
dc.date.available2017-05-09T00:14:06Z
dc.date.copyrightNovember, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28446#432_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130653
dc.description.abstractResidual stress distributions in ferritic steel T-plate weldments have been obtained using the neutron diffraction method. It is shown that the transverse residual stress distribution for two plates of different yield strength are of similar shape and magnitude when normalized appropriately and peak stresses are on the order of the material yield strength. The resultant linear elastic stress intensity factors for these stress distributions have been obtained using the finite element method. It has been shown that the use of the recommended residual stress distributions in UK structural integrity procedures leads to a conservative assessment. The stress intensity factors for the welded T-plate have been shown to be very similar to those obtained using a smooth edge cracked plate subjected to the same local stress field.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Intensity Factors Due to Residual Stresses in T-Plate Welds
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1804199
dc.journal.fristpage432
dc.journal.lastpage437
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsWelded joints
dc.keywordsSteel
dc.keywordsStress concentration AND Yield strength
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record