Show simple item record

dc.contributor.authorToru Hamada
dc.contributor.authorYuichi Nakamura
dc.contributor.authorShigeru Itoh
dc.date.accessioned2017-05-09T00:14:06Z
dc.date.available2017-05-09T00:14:06Z
dc.date.copyrightNovember, 2004
dc.date.issued2004
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28446#409_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130649
dc.description.abstractThe detonation pressure from the steady detonation of high explosives is a characteristic. Nevertheless, in materials processing using high explosives, there are cases when the detonation pressure does not match the intended pressure. In this investigation, as a new method of generating the overdriven detonation effectively, a double cylindrical high explosive set up using two kinds of explosives was developed, and its basic performance is analyzed. The concentric double cylindrical high explosive set up was composed of a high velocity explosive and a low velocity explosive, and the overdriven detonation was performed in the low velocity explosive. In this experiment, the ion gap was set up in the high velocity explosive and low velocity explosive respectively, and the detonation velocity was measured. The detonation pressure was also measured by setting up a manganin gauge (Kyowa Electric Instrument Co., Ltd.,) at the position where the generation of the overdriven detonation phenomenon was expected. Furthermore, the overdriven detonation process of the concentric double cylindrical high explosive was continually observed by numerical analysis and the framing photography. From the experimental results, the very high pressure region including the mach stem was observed in the low velocity explosive, and the overdriven detonation phenomenon was confirmed. The maximum pressure value of the concentric double cylindrical high explosive set up was 2.3 times higher than the Chapman-Jouguet pressure of the single explosive.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Performance of Pressure Vessel Using Concentric Double Cylindrical High Explosive
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1804201
dc.journal.fristpage409
dc.journal.lastpage413
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsExplosions
dc.keywordsExplosives
dc.keywordsNumerical analysis
dc.keywordsGages
dc.keywordsHigh pressure (Physics) AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record