Show simple item record

dc.contributor.authorN. Q. Wu
dc.contributor.authorCedrix Xia
dc.contributor.authorMing Li
dc.contributor.authorN. Perrusquia
dc.contributor.authorScott X. Mao
dc.date.accessioned2017-05-09T00:13:11Z
dc.date.available2017-05-09T00:13:11Z
dc.date.copyrightJanuary, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27055#8_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130131
dc.description.abstract1 mm thick tailor-welded blank of 6061 alloy has been fabricated by Nd:YAG laser welding. The microstructure and the failure mechanism of the welded blank are investigated using optical microscope, atomic force microscope, energy dispersive spectroscopy, microindentation, and nanomechanical tester. The dendrite structure exists at the fusion zone. The partially melted zone is found near the fusion line. The tensile tests show that the welded alloy exhibits lower strength and ductility than the base alloy, and failure occurs at the partially melted zone during tensile testing. Combined nanoindentation with in-situ AFM imaging reveal that the hardness at the partially melted zone is distributed inhomogeneously on the microscopic scale. The hardness at the area adjacent to the grain boundary is lower than that at the center of grain. This is responsible for the failure upon tensile loading, and attributed to the loss of strength and ductility of the welded blank on a macroscopic scale.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInterfacial Structure and Micro and Nano-Mechanical Behavior of Laser-Welded 6061 Aluminum Alloy Blank
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1631023
dc.journal.fristpage8
dc.journal.lastpage13
dc.identifier.eissn1528-8889
dc.keywordsLasers
dc.keywordsAlloys
dc.keywordsWelding
dc.keywordsAluminum alloys
dc.keywordsDuctility
dc.keywordsBlanks
dc.keywordsInterface structure
dc.keywordsHeat
dc.keywordsAtomic force microscopy
dc.keywordsNanoindentation AND Grain boundaries
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record