Show simple item record

dc.contributor.authorZ. Xia
dc.contributor.authorW. A. Curtin
dc.contributor.authorB. W. Sheldon
dc.date.accessioned2017-05-09T00:13:07Z
dc.date.available2017-05-09T00:13:07Z
dc.date.copyrightJuly, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27060#238_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130108
dc.description.abstractThe fracture toughness of highly-ordered multi-wall carbon-nanotube-reinforced alumina composites is calculated from experimental data on nanoindentation cracking. A combined analytical and numerical model, using cohesive zone models for both matrix cracking and nanotube crack bridging and accounting for residual stresses, is developed to interpret the indentation results and evaluate the fracture toughness of the composite. Results show that residual stress and nanotube bridging play important roles in the nanocomposite fracture. The contribution to toughness from the nanotube bridging for cracking transverse to the axis of the nanotubes is calculated to be ∼5 MPa-m1/2 . From the nanotube bridging law, the nanotube strength and interfacial frictional stress are also estimated and range from 15–25 GPa and 40–200 MPa, respectively. These preliminary results demonstrate that nanotube-reinforced ceramics can exhibit the interfacial debonding/sliding and nanotube bridging necessary to induce nanoscale toughening, and suggest the feasibility of engineering residual stresses, nanotube structure, and composite geometry to obtain high-toughness nanocomposites.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Toughness of Highly Ordered Carbon Nanotube/Alumina Nanocomposites
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1751179
dc.journal.fristpage238
dc.journal.lastpage244
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFracture (Process)
dc.keywordsCarbon nanotubes
dc.keywordsFracture toughness
dc.keywordsComposite materials
dc.keywordsNanocomposites
dc.keywordsNanotubes
dc.keywordsToughness
dc.keywordsFibers
dc.keywordsCeramics AND Geometry
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record