Show simple item record

dc.contributor.authorKi-Ju Kang
dc.contributor.authorSeverine Darzens
dc.contributor.authorGee-Seob Choi
dc.date.accessioned2017-05-09T00:13:07Z
dc.date.available2017-05-09T00:13:07Z
dc.date.copyrightOctober, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27063#457_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130103
dc.description.abstractRecently, a new method for residual stress measurement in thin films by using the focused ion beam (FIB) has been proposed by the authors. It is based on the combined capability of the FIB imaging system and of high-resolution strain mapping software (VIC-2D). A simple equation based on two-dimensional elasticity is used to evaluate the residual stress from the displacements due to introducing a slot. The slot length is assumed to be much larger than the slot width or depth. And the effect of the slot width was neglected. However, it is often hard, depending on film materials, to introduce a narrow and deep slot by FIB. In this work some practical issues regarding the slot geometry are addressed. Through two- and three-dimensional finite element analyses, it is explored how the slot length, width and measurement location affect the displacements which are the basic data for residual stress evaluation. As a result, the validity and limit of the equations based on two-dimensional elasticity are evaluated. Also, the effect of material dissimilarity between film and substrate is explored. Finally, examples for a diamond-like carbon film on glass substrate and an aluminum oxide film thermally grown upon an alloy are presented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Geometry and Materials on Residual Stress Measurement in Thin Films by Using the Focused Ion Beam
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1789965
dc.journal.fristpage457
dc.journal.lastpage464
dc.identifier.eissn1528-8889
dc.keywordsThin films
dc.keywordsStress
dc.keywordsGeometry
dc.keywordsFocused ion beams
dc.keywordsDisplacement
dc.keywordsElasticity
dc.keywordsFinite element analysis AND Glass
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record