Show simple item record

dc.contributor.authorYoussef K. Hamidi
dc.contributor.authorLevent Aktas
dc.contributor.authorM. Cengiz Altan
dc.date.accessioned2017-05-09T00:13:06Z
dc.date.available2017-05-09T00:13:06Z
dc.date.copyrightOctober, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27063#420_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130097
dc.description.abstractPerformance of composite materials usually suffers from process-induced defects such as dry spots and microscopic voids. While effects of void content in molded composites have been studied extensively, knowledge of void morphology and spatial distribution of voids in composites manufactured by resin transfer molding (RTM) remains limited. In this study, through-the-thickness void distribution for a disk-shaped, E-glass/epoxy composite part manufactured by resin transfer molding is investigated. Microscopic image analysis is conducted through-the-thickness of a radial sample obtained from the molded composite disk. Voids are found to concentrate primarily within or adjacent to the fiber preforms. More than 93% of the voids are observed within the preform or in a so-called transition zone, next to a fibrous region. In addition, void content was found to fluctuate through-the-thickness of the composite. Variation up to 17% of the average void content of 2.15% is observed through-the-thicknesses of the eight layers studied. Microscopic analysis revealed that average size of voids near the mold surfaces is slightly larger than those located at the interior of the composite. In addition, average size of voids that are located within the fiber preform is observed to be smaller than those located in other regions of the composite. Finally, proximity to the surface is found to have no apparent effect on shape of voids within the composite.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFormation of Microscopic Voids in Resin Transfer Molded Composites
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1789958
dc.journal.fristpage420
dc.journal.lastpage426
dc.identifier.eissn1528-8889
dc.keywordsFibers
dc.keywordsDisks
dc.keywordsPreforms
dc.keywordsResins
dc.keywordsComposite materials
dc.keywordsThickness
dc.keywordsShapes AND Glass
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record