Show simple item record

dc.contributor.authorR. Matsui
dc.contributor.authorH. Horikawa
dc.contributor.authorH. Tobushi
dc.contributor.authorY. Furuichi
dc.date.accessioned2017-05-09T00:13:06Z
dc.date.available2017-05-09T00:13:06Z
dc.date.copyrightOctober, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27063#384_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130092
dc.description.abstractThe tensile deformation and rotating-bending fatigue properties of a highelastic thin wire, a superelastic thin wire and a superelastic thin tube, all made of NiTi alloys, were investigated experimentally. The results obtained are summarized as follows: (1) The stress-strain curve of the highelastic thin wire is approximately linear up to a strain of 4 percent with a stress of 1400 MPa and shows little dependency on temperature and strain rate; (2) The modulus of elasticity for the initial loading stage of both the highelastic wire and the superelastic tube is low, showing superior bending flexibility as is necessary for medical applications; (3) The slopes of the strain-life curves of the alloys are steep in the low-cycle fatigue region (the strain amplitude of the fatigue limit is in the region of 0.6–0.8 percent); and (4) In the tube, fatigue cracking initiates on the rougher inner surface, resulting in a shorter fatigue life than in the case of the wire.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTensile Deformation and Rotating-Bending Fatigue Properties of a Highelastic Thin Wire, a Superelastic Thin Wire, and a Superelastic Thin Tube of NiTi Alloys
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1789952
dc.journal.fristpage384
dc.journal.lastpage391
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsWire
dc.keywordsStress
dc.keywordsStress-strain curves
dc.keywordsLow cycle fatigue
dc.keywordsNickel titanium alloys
dc.keywordsFatigue life
dc.keywordsFatigue properties
dc.keywordsFracture (Process)
dc.keywordsFatigue cracks
dc.keywordsWater
dc.keywordsFatigue testing
dc.keywordsFatigue limit AND Biomedicine
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record