Show simple item record

dc.contributor.authorTim Jaglinski
dc.contributor.authorRoderic Lakes
dc.date.accessioned2017-05-09T00:13:06Z
dc.date.available2017-05-09T00:13:06Z
dc.date.copyrightOctober, 2004
dc.date.issued2004
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27063#378_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/130091
dc.description.abstractCommercial, aluminum die-cast alloys are subject to long-term stresses leading to viscoelastic material responses resulting in inefficient engine operation and failure. Constant load creep tests were conducted on aluminum die-casting alloys: B-390, eutectic Al-Si and a 17% Si-Al alloys. Rupture occurred in the primary creep regime, with the eutectic alloy having the longest times to failure. Primary creep was modeled by J(t)=A+Btn with A, B, and n dependent on stress. Poor creep performance is linked to the brittle fracture of the primary silicon phase as well as other casting defects.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCreep Behavior of Al-Si Die-Cast Alloys
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.1789953
dc.journal.fristpage378
dc.journal.lastpage383
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsAlloys
dc.keywordsStress
dc.keywordsTemperature
dc.keywordsFailure
dc.keywordsProduct quality
dc.keywordsSilicon AND Eutectic alloys
dc.treeJournal of Engineering Materials and Technology:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record