Show simple item record

dc.contributor.authorBorja Oyarzábal
dc.contributor.authorMichael W. Ellis
dc.contributor.authorMichael R. von Spakovsky
dc.date.accessioned2017-05-09T00:12:52Z
dc.date.available2017-05-09T00:12:52Z
dc.date.copyrightMarch, 2004
dc.date.issued2004
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26516#21_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129950
dc.description.abstractThermodynamic, geometric, and economic models are developed for a proton exchange membrane (PEM) fuel cell system for use in cogeneration applications in multi-unit residential buildings. The models describe the operation and cost of the fuel processing sub-system and the fuel cell stack sub-system. The thermodynamic model reflects the operation of the chemical reactors, heat exchangers, mixers, compressors, expanders, and stack that comprise the PEMFC system. Geometric models describe the performance of a system component based on its size (e.g., heat exchanger surface area), and, thus, relate the performance at off-design conditions to the component sizes chosen at the design condition. Economic models are based on data from the literature and address the cost of system components including the fuel processor, the fuel cell materials, the stack assembly cost, the fuel cost, etc. As demonstrated in a forthcoming paper, these models can be used in conjunction with optimization techniques based on decomposition to determine the optimal synthesis and design of a fuel cell system. Results obtained using the models show that a PEMFC cogeneration system is most economical for a relatively large cluster of residences (i.e. 50) and for manufacturing volumes in excess of 1500 units per year. The analysis also determines the various system performance parameters including an electrical efficiency of 39% and a cogeneration efficiency of 72% at the synthesis/design point.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Thermodynamic, Geometric, and Economic Models for Use in the Optimal Synthesis/Design of a PEM Fuel Cell Cogeneration System for Multi-Unit Residential Applications
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1647130
dc.journal.fristpage21
dc.journal.lastpage29
dc.identifier.eissn1528-8994
dc.keywordsDesign
dc.keywordsHeat exchangers
dc.keywordsCombined heat and power
dc.keywordsProton exchange membrane fuel cells
dc.keywordsFuel cells
dc.keywordsOptimization
dc.keywordsCompressors AND Stress
dc.treeJournal of Energy Resources Technology:;2004:;volume( 126 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record