Show simple item record

dc.contributor.authorAmrin F. Harun
dc.contributor.authorMauricio G. Prado
dc.contributor.authorSiamack A. Shirazi
dc.contributor.authorDale R. Doty
dc.date.accessioned2017-05-09T00:12:51Z
dc.date.available2017-05-09T00:12:51Z
dc.date.copyrightJune, 2004
dc.date.issued2004
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26517#140_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129942
dc.description.abstractInducers, which are classified as axial flow pumps with helical path blades, are used within rotary gas separators commonly used in electrical submersible pump installations. A two-phase flow model has been developed to study the inducer performance, focusing on head generation. The proposed model is based on a meridional flow solution technique and utilizes a two-fluid approach. The model indicates that head degradation due to gas presence is a function of flow pattern. The effect of flow pattern diminishes when the void fraction is greater than 15 percent since the centrifugal force dominates the interfacial drag force. In this case, the two-phase flow can be approximated as a homogeneous mixture. The model also suggests that a liquid displacement correction is needed when phase segregation occurs inside the inducer. The new model significantly improves the ability to predict separation efficiency of a rotary gas separator over existing models. Hydrocarbon-air and water-air experimental data were gathered to validate the new model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTwo-Phase Flow Modeling of Inducers
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1738124
dc.journal.fristpage140
dc.journal.lastpage148
dc.identifier.eissn1528-8994
dc.keywordsModeling
dc.keywordsPumps
dc.keywordsTwo-phase flow
dc.keywordsBlades
dc.keywordsDisplacement
dc.keywordsEquations
dc.keywordsPorosity
dc.keywordsMomentum
dc.keywordsFlow (Dynamics)
dc.keywordsFluids
dc.keywordsThickness
dc.keywordsForce
dc.keywordsDrag (Fluid dynamics)
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsWater AND Centrifugal force
dc.treeJournal of Energy Resources Technology:;2004:;volume( 126 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record