Show simple item record

dc.contributor.authorO. S. Shokoya
dc.contributor.authorS. A. (Raj) Mehta
dc.contributor.authorR. G. Moore
dc.contributor.authorB. B. Maini
dc.contributor.authorM. Pooladi-Darvish
dc.contributor.authorA. Chakma
dc.date.accessioned2017-05-09T00:12:51Z
dc.date.available2017-05-09T00:12:51Z
dc.date.copyrightJune, 2004
dc.date.issued2004
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26517#119_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129939
dc.description.abstractFlue gas injection into light oil reservoirs could be a cost-effective gas displacement method for enhanced oil recovery, especially in low porosity and low permeability reservoirs. The flue gas could be generated in situ as obtained from the spontaneous ignition of oil when air is injected into a high temperature reservoir, or injected directly into the reservoir from some surface source. When operating at high pressures commonly found in deep light oil reservoirs, the flue gas may become miscible or near–miscible with the reservoir oil, thereby displacing it more efficiently than an immiscible gas flood. Some successful high pressure air injection (HPAI) projects have been reported in low permeability and low porosity light oil reservoirs. Spontaneous oil ignition was reported in some of these projects, at least from laboratory experiments; however, the mechanism by which the generated flue gas displaces the oil has not been discussed in clear terms in the literature. An experimental investigation was carried out to study the mechanism by which flue gases displace light oil at a reservoir temperature of 116°C and typical reservoir pressures ranging from 27.63 MPa to 46.06 MPa. The results showed that the flue gases displaced the oil in a forward contacting process resembling a combined vaporizing and condensing multi-contact gas drive mechanism. The flue gases also became near-miscible with the oil at elevated pressures, an indication that high pressure flue gas (or air) injection is a cost-effective process for enhanced recovery of light oils, compared to rich gas or water injection, with the potential of sequestering carbon dioxide, a greenhouse gas.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Mechanism of Flue Gas Injection for Enhanced Light Oil Recovery
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1725170
dc.journal.fristpage119
dc.journal.lastpage124
dc.identifier.eissn1528-8994
dc.keywordsDisplacement
dc.keywordsFlue gases
dc.keywordsPetroleum extraction AND Mechanisms
dc.treeJournal of Energy Resources Technology:;2004:;volume( 126 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record