Show simple item record

dc.contributor.authorGoran Durn
dc.contributor.authorNediljka Gaurina- Med̄imurec
dc.contributor.authorHeinz Fröschl
dc.contributor.authorIvan Meandžija
dc.contributor.authorBoris Veronek
dc.contributor.authorSanja Mesić
dc.date.accessioned2017-05-09T00:12:50Z
dc.date.available2017-05-09T00:12:50Z
dc.date.copyrightJune, 2004
dc.date.issued2004
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26517#112_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129938
dc.description.abstractThe aim of this study was to geochemically and mineralogically assess materials from two already closed pits. Total testing and leachate testing (Equilibrium Leach Test and Sequential Leach Test) of topsoil, waste stabilized with lime and underlying rock was performed on composite samples. An analysis of underground water from underlying rock was also accomplished. Major pollutants in stabilized waste from investigated locations differ. High total values of some heavy metals in stabilized waste from one of the investigated locations can probably be attributed to high barite content (mercury, zinc and cadmium) and pipe dope (lead). Mercury, zinc and cadmium are enriched in the organic-sulfide fraction that might indicate they are tied up as sulfide impurities in barite. In distilled water lecheate of stabilized waste from this location higher concentrations of Pb, Hg and TOC were observed. In the stabilized waste from the second location high total values of total oils and mineral oils, PAH and BTEX were detected, while distilled water lecheate is enriched with Hg, total oils and mineral oils, AOX and TOC. This investigation shows that stabilization with lime is not always a suitable method for treatment of wastes from the petroleum industry, particularly those that are contaminated with both organic and inorganic contaminants. Proper characterization of the waste material to be processed is needed in order to select the most appropriate method of treatment. Our ongoing research study uses different pretreatment techniques and different absorbents (organophilic clay, calcined siliceous earth, etc.) to preferentially absorb organic contaminants that can be used before stabilization/solidification.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Geochemical and Mineralogical Assessment of Lime Stabilized Waste from the Petroleum Industry in Croatia
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1715102
dc.journal.fristpage112
dc.journal.lastpage118
dc.identifier.eissn1528-8994
dc.keywordsPetroleum
dc.keywordsRocks
dc.keywordsWater
dc.keywordsPetroleum industry
dc.keywordsMineral oil
dc.keywordsLeachates
dc.keywordsHeavy metals
dc.keywordsSolidification
dc.keywordsComposite materials
dc.keywordsEquilibrium (Physics)
dc.keywordsPollution
dc.keywordsAbsorbents AND Pipes
dc.treeJournal of Energy Resources Technology:;2004:;volume( 126 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record