Show simple item record

dc.contributor.authorCormack C. Gordon
dc.contributor.authorDon W. Dareing
dc.date.accessioned2017-05-09T00:12:49Z
dc.date.available2017-05-09T00:12:49Z
dc.date.copyrightSeptember, 2004
dc.date.issued2004
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26521#201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129927
dc.description.abstractThe objective of this paper is to present a direct and useful method for establishing the configuration of tapered stress joints for marine risers so that stress levels are fairly balanced over the length of the stress joint and within acceptable stress levels. The method of solution approximates straight tapered stress joints with one, whose cross sectional moment of inertia varies parabolically along the stress joint. This approximation leads to the classic Euler type differential equation, which can be solved directly giving a closed form solution. The formulation of deflection and stresses should be of use to designers of marine tubulars. Even though the focus of the study is on a static analysis of top located stress joints, the method of solution can be adapted to mudline attachment locations as well as dynamic analyses.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConfiguring Marine Riser Tapered Stress Joints Used in Top-Supported Applications
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.1781671
dc.journal.fristpage201
dc.journal.lastpage207
dc.identifier.eissn1528-8994
dc.keywordsStress AND Design
dc.treeJournal of Energy Resources Technology:;2004:;volume( 126 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record