Show simple item record

dc.contributor.authorReuven Katz
dc.contributor.authorJohn Yook
dc.contributor.authorYoram Koren
dc.date.accessioned2017-05-09T00:12:37Z
dc.date.available2017-05-09T00:12:37Z
dc.date.copyrightJune, 2004
dc.date.issued2004
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26329#397_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129794
dc.description.abstractComputerized control systems for machine tools must generate coordinated movements of the separately driven axes of motion in order to trace accurately a predetermined path of the cutting tool relative to the workpiece. However, since the dynamic properties of the individual machine axes are not exactly equal, undesired contour errors are generated. The contour error is defined as the distance between the predetermined and actual path of the cutting tool. The cross-coupling controller (CCC) strategy was introduced to effectively decrease the contour errors in conventional, orthogonal machine tools. This paper, however, deals with a new class of machines that have non-orthogonal axes of motion and called reconfigurable machine tools (RMTs). These machines may be included in large-scale reconfigurable machining systems (RMSs). When the axes of the machine are non-orthogonal, the movement between the axes is tightly coupled and the importance of coordinated movement among the axes becomes even greater. In the case of a non-orthogonal RMT, in addition to the contour error, another machining error called in-depth error is also generated due to the non-orthogonal nature of the machine. The focus of this study is on the conceptual design of a new type of cross-coupling controller for a non-orthogonal machine tool that decreases both the contour and the in-depth machining errors. Various types of cross-coupling controllers, symmetric and non-symmetric, with and without feedforward, are suggested and studied. The stability of the control system is investigated, and simulation is used to compare the different types of controllers. We show that by using cross-coupling controllers the reduction of machining errors are significantly reduced in comparison with the conventional de-coupled controller. Furthermore, it is shown that the non-symmetric cross-coupling feedforward (NS-CC-FF) controller demonstrates the best results and is the leading concept for non-orthogonal machine tools.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleControl of a Non-Orthogonal Reconfigurable Machine Tool
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue2
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1771692
dc.journal.fristpage397
dc.journal.lastpage405
dc.identifier.eissn1528-9028
dc.keywordsMachine tools
dc.keywordsControl equipment
dc.keywordsMotion
dc.keywordsStability
dc.keywordsMachinery
dc.keywordsErrors
dc.keywordsFeedforward control
dc.keywordsMachining AND Cutting tools
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2004:;volume( 126 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record