Show simple item record

dc.contributor.authorSimon S. Park
dc.contributor.authorYusuf Altintas
dc.date.accessioned2017-05-09T00:12:33Z
dc.date.available2017-05-09T00:12:33Z
dc.date.copyrightSeptember, 2004
dc.date.issued2004
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26333#443_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129750
dc.description.abstractThis paper presents a dynamically compensated Spindle Integrated Force Sensor (SIFS) system to measure cutting forces. Piezo-electric force sensors are integrated into the stationary spindle housing. The structural dynamic model between the cutting forces acting on the tool tip and the measured forces at the spindle housing is identified. The system is first calibrated to compensate the influence of spindle run-out and unbalance at different speeds. Using the cutting force signals measured at the spindle housing, a Kalman Filter is designed to filter the influence of structural modes on the force measurements. The frequency bandwidth of the proposed sensor system is significantly increased with the proposed sensing and the signal processing method.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Compensation of Spindle Integrated Force Sensors With Kalman Filter
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1789531
dc.journal.fristpage443
dc.journal.lastpage452
dc.identifier.eissn1528-9028
dc.keywordsForce
dc.keywordsSensors
dc.keywordsSpindles (Textile machinery)
dc.keywordsCutting
dc.keywordsForce sensors
dc.keywordsKalman filters
dc.keywordsForce measurement
dc.keywordsTransfer functions AND Filters
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2004:;volume( 126 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record