Show simple item record

dc.contributor.authorShahin S. Nudehi
dc.contributor.authorRanjan Mukherjee
dc.contributor.authorAssoc. Professor
dc.date.accessioned2017-05-09T00:12:28Z
dc.date.available2017-05-09T00:12:28Z
dc.date.copyrightDecember, 2004
dc.date.issued2004
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26336#790_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/129717
dc.description.abstractMany dynamical systems use transducers that can function both as actuators and sensors. It is possible to continuously switch the functionality of the transducer elements in such systems and effectively use each element both as an actuator and a sensor. This provides the scope for significantly reducing the number of transducer elements required for complete controllability and observability of the system and hence reduce the hardware required for controlled system operation. In this paper we advocate underactuation and undersensing in dynamical systems with the objective of reducing cost, weight, and system complexity. To this end, we first illustrate the role of switching in enhancing controllability and observability in underactuated and undersensed linear time-invariant systems and determine the switching requirement for observer-based control designs. For a proof of principle, we consider the problem of vibration suppression in a flexible beam instrumented with piezoelectric transducers. Using simulation and experiments, we demonstrate feasibility of switching the piezoelectric elements between actuator and sensor modalities and establish the merit of introducing underactuation and undersensing deliberately.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEnhancing Controllability and Observability in Underactuated and Undersensed Systems Through Switching: Application to Vibration Control
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.1850532
dc.journal.fristpage790
dc.journal.lastpage799
dc.identifier.eissn1528-9028
dc.keywordsTheorems (Mathematics)
dc.keywordsSensors
dc.keywordsControl equipment
dc.keywordsHardware
dc.keywordsVibration control
dc.keywordsActuators
dc.keywordsPiezoelectric transducers
dc.keywordsTransducers
dc.keywordsVibration
dc.keywordsVibration suppression
dc.keywordsSwitches
dc.keywordsWeight (Mass)
dc.keywordsSimulation
dc.keywordsDesign AND Dynamic systems
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2004:;volume( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record