Show simple item record

dc.contributor.authorS. Marie
dc.contributor.authorM. Nédélec
dc.date.accessioned2017-05-09T00:11:13Z
dc.date.available2017-05-09T00:11:13Z
dc.date.copyrightMay, 2003
dc.date.issued2003
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28425#209_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128993
dc.description.abstractNew analytical equations are developed to calculate stresses in an elbow submitted to an in-plane bending moment. If a detailed stress analysis is asked (for example, for the elastic stress intensity factor calculation KI), available code equations are not accurate enough because their determination is based on an axi-symmetric analysis, where the elbow is compared to a torus, and therefore the end effects are not taken into account. This work relies on elastic finite element calculations using shell elements. Longitudinal and circumferential stresses are calculated in the median section and in the junction section between the elbow and the straight pipe. Elbows considered here have a bend angle αc=45, 90, and 180 deg and show a ratio rm/t between 5 and 20 and a parameter λ up to 1. Analytical expressions are proposed to fit the membrane and bending components of each stress. Coefficients of these equations are tabulated and expressed only as a function of the ratio rm/t and the parameter λ for the median section and the junction section. An interpolation methodology is also given for intermediate elbow angles: these analytical relations give a simple solution to have an accurate estimate of the elastic stress distribution in the median section and the junction section in a elbow submitted to an in-plane bending moment, for a wide range of elbow angles, ratios rm/t and parameters λ.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic Stresses in Elbows Submitted to In-Plane Bending Moment
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1533800
dc.journal.fristpage209
dc.journal.lastpage220
dc.identifier.eissn1528-8978
dc.keywordsStress AND Junctions
dc.treeJournal of Pressure Vessel Technology:;2003:;volume( 125 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record