Show simple item record

dc.contributor.authorR. R. de Swardt
dc.date.accessioned2017-05-09T00:11:10Z
dc.date.available2017-05-09T00:11:10Z
dc.date.copyrightAugust, 2003
dc.date.issued2003
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28427#305_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128968
dc.description.abstractA comparative study to map the residual strain/stress states through the walls of autofrettaged thick-walled high-strength steel cylinders has been conducted with neutron diffraction, Sachs boring, and the compliance methods. Test samples with different wall thickness ratios were prepared to have significant amounts of reverse yielding due to the Bauschinger effect. In an effort to explain observed differences in the hoop stress results, the crack compliance experiment was simulated with finite elements. Several residual stress fields were introduced in the finite element models. A theoretical finite element (FE) model, which is capable of accurately modeling the highly nonlinear reverse yielding of the material, was able to accurately predict the crack compliance strain measurements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFinite Element Simulation of Crack Compliance Experiments to Measure Residual Stresses in Thick-Walled Cylinders
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1593076
dc.journal.fristpage305
dc.journal.lastpage308
dc.identifier.eissn1528-8978
dc.keywordsResidual stresses
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsCylinders
dc.keywordsFinite element model
dc.keywordsNeutron diffraction
dc.keywordsStrain measurement AND Measurement
dc.treeJournal of Pressure Vessel Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record