Show simple item record

dc.contributor.authorEric Petitpas
dc.contributor.authorB. Campion
dc.date.accessioned2017-05-09T00:11:10Z
dc.date.available2017-05-09T00:11:10Z
dc.date.copyrightAugust, 2003
dc.date.issued2003
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28427#293_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128965
dc.description.abstractThe thermo-mechanical effects of firing induce very considerable stresses on the internal surface of the gun barrels. Consequently, micro-cracks appear very soon in the life of the tube. So it is important to control the propagation of these cracks. For more than 10 years, modeling has been used by Giat-Industries to understand and to control this phenomenon. This paper focuses on the study of short crack propagation kinetics during firings. Two-dimensional modeling taking into consideration the residual stresses from a hydraulic autofrettage and the thermo-mechanical stresses due to the successive firings is presented. The cyclic plastic behavior of the material is taken into consideration. This makes it possible to observe the effect of loss of the residual stresses at the surface due to the firings. Cracks of increasing length are introduced in the model to calculate the stress intensity factor. An innovative point is the modeling of the contact between the crack lips in order to take into account the effect of crack closing during cooling. Indeed the effective stress intensity factor range is calculated using this model for numerous crack lengths. A classic Paris law is then used to predict the crack propagation kinetics. Sensitivity analysis has been carried out using this model; in particular, the effect of autofrettage on crack propagation is analyzed as well as the effect of the use of lower-strength steels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Propagation in a Gun Barrel Due to the Firing Thermo-Mechanical Stresses
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1592813
dc.journal.fristpage293
dc.journal.lastpage298
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsCrack propagation
dc.keywordsFiring (materials)
dc.keywordsGun barrels
dc.keywordsAutofrettage
dc.keywordsCooling AND Steel
dc.treeJournal of Pressure Vessel Technology:;2003:;volume( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record