Show simple item record

dc.contributor.authorM. Perl
dc.contributor.authorB. Ostraich
dc.date.accessioned2017-05-09T00:11:08Z
dc.date.available2017-05-09T00:11:08Z
dc.date.copyrightNovember, 2003
dc.date.issued2003
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28430#425_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128947
dc.description.abstractThe effect of crack depth unevenness on the mode I stress intensity factor (SIF) distributions along the fronts of semi-elliptical surface cracks is studied. These three-dimensional radial cracks pertain to large uniform arrays of unequal-depth cracks emanating from the bore of a pressurized thick-walled cylinder. The analysis is based on the “two crack depth level model,” previously proposed, and is performed via the finite element (FE) method employing singular elements along the crack front. The distribution of KIP-the stress intensity factor due to pressurization, for numerous uneven array configurations bearing n=n1+n2=8 to 128 cracks, a wide range of crack depth to wall thickness ratios, a1/t=0.01 to 0.4, and various crack ellipticities, a1/c1=0.3 to 1.5, are evaluated for a cylinder of radii ratio Ro/Ri=2. To increase the accuracy of the evaluated SIFs an existing improved version of the displacement extrapolation method is used. The results clearly indicate that unevenness, as reflected in KIP distributions, depends on both the number of cracks in the array as well as on the cracks’ depths and ellipticities. The “interaction range” for the various configurations of uneven crack arrays is evaluated. The range of influence between adjacent cracks on the maximal SIF, KPmax, is found to be dependent on the density of the array, as reflected in the inter-crack aspect-ratio, as well as on the cracks’ elipticity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Uniform Arrays of Three-Dimensional Unequal-Depth Cracks in a Thick-Walled Cylindrical Pressure Vessel
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1613946
dc.journal.fristpage425
dc.journal.lastpage431
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsCylinders AND Stress
dc.treeJournal of Pressure Vessel Technology:;2003:;volume( 125 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record