Show simple item record

dc.contributor.authorC. Levy
dc.contributor.authorM. Perl
dc.contributor.authorQ. Ma
dc.date.accessioned2017-05-09T00:11:07Z
dc.date.available2017-05-09T00:11:07Z
dc.date.copyrightNovember, 2003
dc.date.issued2003
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28430#379_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/128939
dc.description.abstractErosion geometry effects on the mode I stress intensity factor (SIF) for a crack emanating from the farthest erosion’s deepest point in a multiply, finite-length or full-length eroded, partially autofrettaged, pressurized, thick-walled cylinder is investigated. The problem is solved via the FEM method. Autofrettage, based on von Mises’ yield criterion, is simulated by thermal loading and SIFs are determined by the nodal displacement method. SIFs were evaluated for a variety of relative crack depths, a/t=0.01–0.30 and crack ellipticities, a/c=0.5–1.5 emanating from the tip of the erosion of various geometries, namely, (a) semi-circular erosions of relative depths of 1–10% of the cylinder’s wall thickness, t; (b) arc erosions for several dimensionless radii of curvature, r′/t=0.05–0.3; and (c) semi-elliptical erosions with ellipticities of d/h=0.5–1.5. In the cases of finite erosions, the semi-erosion length to the semi-crack length, Le/c, was between two and ten, erosion angular spacing, α, was between 7 and 120 degrees, whereas percent autofrettage investigated included 30%, 60%, and 100%. The normalized SIFs and the normalized effective SIFs of a crack emanating from the farthest finite erosion are found to rise sharply for values of Le/c<3. Both the normalized SIF and normalized effective SIF values are mitigated as the amount of partial autofrettage increases with the most rapid decrease occurring between 0–60% autofrettage. The purpose of this study is to detail these findings.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Finite Three-Dimensional Multiple Axial Erosions on the Fatigue Life of Partially Autofrettaged Pressurized Cylinders
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.1616582
dc.journal.fristpage379
dc.journal.lastpage384
dc.identifier.eissn1528-8978
dc.keywordsFracture (Materials)
dc.keywordsErosion
dc.keywordsCylinders
dc.keywordsAutofrettage
dc.keywordsStress AND Fatigue life
dc.treeJournal of Pressure Vessel Technology:;2003:;volume( 125 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record